Maxfind Electric Skateboard Max 2,2000W Motor Wireless Remote Controller With COOL 4 Wheel Electric Skateboard Hoverboard
Energetic Power Strong Battery
The same type of battery is used for Tesla, using a nickel plate connection + integral mounting bracket. The use of skateboard batteries is very safe and stable. The BMS intelligent power management system cooperates with the counter-bias brake charging technology of the main control board to convert the kinetic energy of the brake into electrical energy and store it in the battery. After increasing the number of batteries to 20, the power life will stand out among the peers, running 28km at a time.
Excellent Performance Strong Power
The diameter of the direct-drive motor is increased to 90mm, and the imported magnetic steel sheet and pure copper coil are used for more than 1000w. The movement efficiency and torque are improved by more than 35% under the optimization of the new winding process. In order to improve the heat dissipation performance of the air convection cooling system as a whole, the engine is designed as a honeycomb (radial) heat dissipation aluminum sheet to increase the heat dissipation area and improve the heat dissipation effect.
A tribute to Cadillac, inspired by its diamond-cut design, the diamond-cut design can be seen from the side, the tail or the back. In order to create such a light and delicate body texture and edge, the MAX2 uses a high-strength synthetic composite material, the design elements of the 31inch fuselage are retained to the maximum extent while effectively reducing weight.
FOC Dual Mode: Sine wave processor
The savvy brain of MAX2 comes from a deeply developed dual-mode drive permanent-magnet synchronous 32-bit microprocessor core. Using the FOC sine wave drive architecture ESC and power system, the motor control transition is smoother, and the overall efficiency of the motor ESC is increased by 30%. The (EBS) kinetic energy recovery function, through the motor power storage and reuse, increases the skateboard cruising range flexible electromagnetic brake function (EBS), comes with Hall error correction and repair function, and achieves the same comfort and safety as the car ABS brake.
The main board and battery are completely installed into the integrated diamond board, and the motor is completely enclosed in the rear wheel. This design provides up to IP65 dust and water protection for the entire vehicle.
Wireless Remote Controller
The remote control is ergonomically designed for a comfortable grip. A new generation of enhanced wireless technology, support 2.4/5.8GHz FM dual-band, communication without blind spots. Switch between speed and direction for more skateboarding fun. Exclusively develops cruise control and enjoys the black technology of the Cadillac sports car.Professional Truck
Designed in collaboration with Spanish designers, the AISIMg5 material for automotive trains is molded in a high-pressure casting mold to increase the compactness of the product and the sand hole ratio is less than 0.5%. The impact resistance of the product is at least 3 times that of the ordinary bracket. The special black yarn spraying process of scratch-resistant, with a deep black, interpretation of the noble and low-key noble quality.New Generation of Rubber Anti-slip Sandpaper
We have experienced hundreds of material formula trials, overcoming the technical difficulty far beyond the past, exiting a non-slip mat that is different from traditional emery and using PVC and PEA synthetic materials, making anti-skid lines through the embossing roller process, and then hitting Color design production. Under the anti-slip effect, it can prevent scratches and scratches. Behind every ingenuity is a technological breakthrough that is unique.
IN THE BOX
MAX 2 Board - Ready to ride now
Bluetooth Remote and Sling
Universal Wall Charger - for charging the board
USB Connect Charger Cable - for charging the Remote
All-in-one Multi-function Tool
Quick Getting Start
At first, press the power button about 3 second (the button located at the bottom of the skateboard) untill the power button blue light was turned on, the skateboard will give "didi" sound and the power button keeps blue light. And then turn on the remote controller, you will hear "di" sound, see the remote indicator twinking and four LED indicators bright on the remote, finally power on operation is finished.
2. Check the speed mode
Please make sure the speed mode's switch is located at "LO" (LO means low speed mode, speed 8km/h). please be sure NOT to switch the speed mode while your are sliding on the boards!
3. Get on the board
At first draw down the control trigger to let the skateboard stay brake condition. then put your feet up separately and make sure keep your knees benting, maintain control of your body's center of gravity over the skateboard.
4. Get start to slide
Before moving forward, keep your body's center of gravity placed on the front foot, then push forward the control trigger slowly, you will find the skateboard is moving forward slowly; Before you want to break, please keep your body's center of gravity is place on the back foot, then draw down the control trigger slowly, you will find the skateboard will be decelerate slowly (Please do NOT switch to HI speed mode unless your are very familiar on sliding)
5. Turn a corner
Use your own sole and heel, incline the skateboard to a suitable tilt angle, the inclined direction is as same as the turn corner direction. When you turning a corner, please lower your body's center of gravity to avoild loosing gravity and fall off the skateboard.
6. Power off
After you finished sliding, please turn off the remote controller power first and then turn off the skateboard power. The skateboard power will be automatic shut down in 8 minites after you leave the skateboard along.
Shipping: 3 - 5 Days DHL